D-Link DCS-933L User Manual - Page 26

Section 3 - Configuration Repeater Setup This section allows you to setup and configure the wireless network extending feature of your camera. Repeater Mode allows your camera to extend the range of your existing wireless network. You can choose to use the same network name and settings as your existing wireless network, or you can create a new one. Enable Check this box to enable Repeater Mode. Repeater Mode: Host Wireless This shows the name of the Host wireless network that the camera is Network Name: connected to and will extend. Extended Select an option: Wireless • Same as Host Wireless Network Name: Your extended network Network Name will use the same name and settings as your Host network. Your (SSID): devices can use the same wireless information to connect to both the Host and Extended networks. • Create a New Wireless Network Name: This allows you to manually set the name and security used for the extended network. You will need to add this information for each wireless device that connects to this Extended network. Maximum Set the maximum number of clients that are allowed to connect to the Clients Allowed extended network. to Connect: Security Mode: If you choose to Create a New Wireless Network Name, you can set your wireless security options here. D-Link DCS-933L User Manual 26