D-Link DES-3010GA Product Manual - Page 138

Defining the Forwarding Database Defining Dynamic Forwarding Database Entries Defining Dynamic Forwarding Database Entries The Dynamic Addresses Page contains parameters for querying information in the Dynamic MAC Address Table, including the interface type, MAC addresses, VLAN, and table storing. The Dynamic MAC Address table contains information about the aging time before a dynamic MAC address is erased, and includes parameters for querying and viewing the Dynamic MAC Address table. The Dynamic MAC Address table contains address parameters by which packets are directly forwarded to the ports. The Dynamic Address Table can be sorted by interface, VLAN, and MAC Address. To configure the Dynamic MAC Address table: 1. Click Advanced Setup > Forwarding Database > Dynamic Addresses. The Dynamic Addresses Page opens. Figure 84: Dynamic Addresses Page The Dynamic Addresses Page contains the following fields: • Aging Interval (secs)- Specifies the amount of time the MAC address remains in the Dynamic MAC Address table before it is timed out, if no traffic from the source is detected. The default value is 300 seconds. • Port - Specifies the interface for which the table is queried. There are two interface types from which to select. • MAC Address - Specifies the MAC address for which the table is queried. • VLAN ID - Specifies the VLAN ID for which the table is queried. • Address Table Sort Key -Specifies the means by which the Dynamic MAC Address Table is sorted. The address table can be sorted by address, VLAN, or interface. Page 137