D-Link DES-3010GA Product Manual - Page 249
<Enter>, Problems, Possible Cause, Solution, Enter Y. The device reboots. After the POST
UPC - 790069280689
View all D-Link DES-3010GA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
D-Link DES-3010FA/GA User Guide Problems Add and Edit pages do not open. Lost password Possible Cause A pop-up blocker is enabled. Solution Disable pop-up blockers. The Password Recovery Procedure enables the user to override the current password configuration, and disables the need for a password to access the console. The password recovery is effective until the device is reset. If the password/user name has been forgotten or lost. The password must be reconfigured using either the CLI commands or via the Embedded Web Interface. The Password Recovery Procedure is invoked from the Startup menu: 1. Reboot the system either by disconnecting the power supply, or enter the command reboot, the following message is displayed: Console> reload Are you sure you want to reboot the system (y/n)[n]? 2. Enter Y. The device reboots. After the POST, when the text "Autoboot in 2 seconds press RETURN or Esc. to abort and enter prom." is displayed, press . The Startup Menu is displayed. [1] Download software [2] Erase flash file [3] Erase flash sectors [4] Password Recovery Procedure [5] Enter Diagnostic Mode [6] Back 3. Enter 4 within 15 seconds after the bootup pro- cess from the StartUp menu. If the startup menu option is not selected within 15 seconds, the accessibility requirements are erased, and the system continues to load. The password is defined using the CLI mode. 4. Enter the CLI configuration mode. 5. Enter the password commands: username, enable password, or password [line]. For example: enable password level 1 password ***** 6. Enter the command exit. The CLI mode is exited. Page 248