D-Link DES-3010GA Product Manual - Page 182

Configuring SNMP Configuring SNMP Notifications SNMPv3 Notification Recipient The SNMPv3 Notification Recipient table contains the following fields: • Recipient IP - Displays the IP address to which the traps are sent. • Notification Type - Displays the type of notification sent. The possible field values are: - Trap - Indicates that traps are sent. - Inform - Indicates that informs are sent. • User Name - Displays the user to which SNMP notifications are sent. • Security Level - Displays the means by which the packet is authenticated. The possible field values are: - No Authentication - Indicates that the packet is neither authenticated nor encrypted. - Authentication - Indicates that the packet is authenticated. • UDP Port - The UDP port used to send notifications. The field range is 1-65535. The default is 162. • Filter Name - Includes or excludes SNMP filters. • Timeout - The amount of time (seconds) the device waits before resending informs. The field range is 1300. The default is 10 seconds. • Retries - The amount of times the device resends an inform request. The field range is 1-255. The default is 3. • Remove - Deletes the currently selected recipient. The possible field values are: - Checked - Removes the selected recipient from the list of recipients. - Unchecked - Maintains the list of recipients. 2. Click . The Add SNMP Notification Receiver Page opens: Figure 116: Add SNMP Notification Receiver Page Page 181