D-Link DES-3010GA Product Manual - Page 90

Configuring Device Security Configuring Network Security Configuring Multiple Hosts The Multiple Host Page allows network managers to configure advanced port-based authentication settings for specific ports and VLANs. For more information on advanced port-based authentication, see "Advanced PortBased Authentication" on page 83. To define the network authentication global properties: 1. Click Advanced Setup > Network Security > Authentication > Multiple Host. The Multiple Host Page opens. Figure 44: Multiple Host Page The Multiple Host Page contains the following fields: • Port - Displays the port number for which advanced port-based authentication is enabled. • Multiple Hosts - Indicates whether multiple hosts are enabled. Multiple hosts must be enabled in order to either disable the ingress-filter, or to use port-lock security on the selected port. The possible field values are: - Multiple - Multiple hosts are enabled. - Disable- Multiple hosts are disabled. • Action on Violation - Defines the action to be applied to packets arriving in single-host mode, from a host whose MAC address is not the supplicant MAC address. The possible field values are: - Forward - Forwards the packet. - Discard - Discards the packets. This is the default value. - Shutdown - Discards the packets and shuts down the port. The ports remains shut down until reactivated, or until the device is reset. Page 89