D-Link DES-3326S Reference Manual - Page 10
Setting the Switch, s IP Address - 3326sr
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual Fig. 1- 1. Initial Console screen. There is no initial username or password. Just press the Enter key twice to display the CLI input cursor − DES-3326SR:4#. This is the command line where all commands are input. Setting the Switch's IP Address Each Switch must be assigned its own IP Address, which is used for communication with an SNMP network manager or other TCP/IP application (for example BOOTP, TFTP). The switch's default IP address is 10.1.1.80. You can change the default Switch IP address to fit your networking address scheme. The switch is also assigned a unique MAC address by the factory. This MAC address cannot be changed, and can be found by typing the command reboot. Fig. 1- 2. Reboot command Fig. 1- 3. Boot Screen 10 Introduction