D-Link DES-3326S Reference Manual - Page 129
enable stp
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual Example Usage: To configure STP with path cost 19, priority 15, and state enabled for ports 1-5 of module 1. DES-3326SR:4#config stp_ports 1:1-1:5 cost 19 priority 15 state enabled Command: config stp_ports 1-5 cost 19 priority 15 state enabled Success. DES-3326SR:4# enable stp Purpose Syntax Description Parameters Restrictions Used to globally enable STP on the switch. enable stp This command allows the Spanning Tree Protocol to be globally enabled on the switch. none. Only administrator-level users can issue this command. Spanning Tree Commands 129
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Spanning Tree Commands
129
Example Usage:
To configure STP with path cost 19, priority 15, and
state
enabled for ports 1-5 of module 1.
DES-3326SR:4#config stp_ports 1:1-1:5 cost 19 priority 15 state
enabled
Command: config stp_ports 1-5 cost 19 priority 15 state enabled
Success.
DES-3326SR:4#
enable stp
Purpose
Used to globally enable STP on the switch.
Syntax
enable stp
Description
This command allows the Spanning Tree
Protocol to be globally enabled on the
switch.
Parameters
none.
Restrictions
Only administrator-level users can issue
this command.