D-Link DES-3326S Reference Manual - Page 223

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual Example Usage: To add route redistribution settings: DES-3326SR:4#create route redistribute dst ospf src rip Command: create route redistribute dst ospf src rip Success. DES-3326SR:4# create route redistribute dst rip Purpose Used to add route redistribution settings for the exchange of OSPF routes to RIP routes on the switch. Syntax create route redistribute dst rip src [lo c al/st at i c /o spf { all/i nt e rnal/e x t e rnal/t y pe _1 /t y pe _2 } ] {metric } Description This command will redistribute routing information between the OSPF and Rip routing protocols to all routers on the network that are running OSPF or RIP. Routing information entered into the Static Routing Table on the local DES-3326SR switch is also redistributed Parameters src [static/ospf {all/internal/external/type_1/type_2}] − Allows the selection of the protocol of the source device. dst − Allows the selection of the protocol of Route Redistribution Commands 223