D-Link DES-3326S Reference Manual - Page 157
D-Link DES-3326S - Switch - Stackable Manual
![]() |
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config scheduling specify the maximum amount of time that packets will be delayed before being transmitted. For a given priority queue, a value between 0 and 255 can be specified. This number is then multiplied by 16 milliseconds to determine the maximum allowed latency. For example, if 3 is specified for queue 0, the maximum latency allowed will be 3 X 16 ms = 48 ms. When queue 0 has been waiting to transmit packets for longer than 48 ms, the currently transmitting priority queue is allowed to finish transmitting its current packet, and then queue 0 is allowed to begin transmitting its packets. Parameters − Specifies which of the four priority queues the config scheduling command will be applied to. The four priority queues are identified by number − from 0 to 3 − with queue 0 being the highest priority. max_packet − Specifies the maximum number of packets the above specified priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. A value between 0 and 255 packets can be specified. max_latency − Specifies the maximum amount of time the above specified priority queue will have to wait QOS Commands 157
![](/manual_guide/products/dlink-des3326s-reference-manual-7bb9a98/157.png)