D-Link DES-3326S Reference Manual - Page 257
config bootp_relay add
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config bootp_relay add Purpose Used to add an IP destination address to the switch's BOOTP relay table. Syntax config bootp_relay add ipif Description This command adds an IP address as a destination to forward (relay) BOOTP packets to. Parameters − The name of the IP interface which contains the IP address below. Restrictions − The BOOTP server IP address. Only administrator-level users can issue this command. Example Usage: To add a BOOTP relay. DES-3326SR:4#config bootp_relay add ipif System 10.43.21.12 Command: config bootp_relay add ipif System 10.43.21.12 Success. DES-3326SR:4# Bootp Relay Commands 257
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Bootp Relay Commands
257
config bootp_relay add
Purpose
Used to add an IP destination address to the
switch
’
s BOOTP relay table.
Syntax
config bootp_relay add ipif <ipif_name>
<ipaddr>
Description
This command adds an IP address as a
destination
to
forward
(relay)
BOOTP
packets to.
Parameters
<ipif_name>
-
The name of the IP interface
which contains the IP address below.
<ipaddr>
-
The BOOTP server IP address.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To add a BOOTP relay.
DES-3326SR:4#config bootp_relay add ipif System 10.43.21.12
Command: config bootp_relay add ipif System 10.43.21.12
Success.
DES-3326SR:4#