D-Link DES-3326S Reference Manual - Page 139
config multicast_fdb
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config multicast_fdb Purpose Used to configure the switch's multicast MAC address forwarding database. Syntax config multicast_fdb [add/delete] Description This command configures the multicast MAC address forwarding table. Parameters − The name of the VLAN on which the MAC address resides. − The MAC address that will be added to the forwarding table. [add/delete] − Add will add the MAC address to the forwarding table, delete will remove the MAC address from the forwarding table. − Specifies a range of ports to be configured. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 would specify switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. Restrictions Only administrator-level users can issue this command. Forwarding Database Commands 139