D-Link DFL-2500 User Guide - Page 251
Authentication Options/Local User DB
![]() |
View all D-Link DFL-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
232 Chapter 22. VPN Protocols & Tunnels 4. User Authentication Rule Next step is to configure the user authentication rule to use for authentication. User Authentication → User Authentication Rules → Add → User Authentication Rule: Enter the following: Name: PPTPUARule Agent: PPP Authentication Source: Local Interface: L2TPServer Originator IP: 0.0.0.0/0 (all-nets) Terminator IP: 10.0.0.1 (The IP the PPTP server is listening on) Authentication Options/Local User DB: UserDB (The user database created earlier) PPP Agent Options: Select the authentication protocols to support. (Default setting is to support all authentication protocols) Then click OK 5. IP Rules The final step is to set up a rule to allow traffic from PPTP clients onto the LAN network. Rules → IP Rules → Add → IP Rule: Enter the following: Name: FromPPTPClients Action: Allow Service: Any Source Interface: PPTPServer Source Network: 192.168.1.10-192.168.1.20 Destination Interface: LAN Destination Network: 192.168.1.0/24 (Network on LAN interface) Then click OK If the PPTP clients should be able to access external resources (such as the Internet for example) a NAT rule has to be configured as well. When the configuration is saved and activated, it should be possible for PPTP clients to connect to the PPTP server on 10.0.0.1 on the WAN interface. D-Link Firewalls User's Guide
![](/manual_guide/products/dlink-dfl2500-user-guide-83bdca9/251.png)