D-Link DFL-2500 User Guide - Page 286
Server1 and SSH
![]() |
View all D-Link DFL-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
24.3. Scenario: Enabling SLB 267 This example describes how SLB can be used to load balance SSH connections to two SSH servers behind a D-Link Firewall connected to the Internet with IP address ip ext, as shown in Figure 24.2. The two SSH servers have the private IP addresses 192.168.1.10 and 192.168.1.11. WebUI : 1. Create Objects First of all we need to create local objects to keep the IP address for each server. Objects → Address Book → Add → IP4 Host/Network: Name: SSH Server1 IP Address: 192.168.1.10 Then click OK Objects → Address Book → Add → IP4 Host/Network: Name: SSH Server2 IP Address: 192.168.1.11 Then click OK 2. Create SAT SLB Rule Next step is to set up the SAT SLB rule. Rules → IP Rules → Add → IP Rule: Name: SSH SLB Action: SLB SAT Service: ssh Source Interface: any Source Network: all-nets Destination Interface: core Destination Network: ip ext SAT Server Load Balancing Server Addresses: Select SSH Server1 and SSH Server2. Then click OK D-Link Firewalls User's Guide
![](/manual_guide/products/dlink-dfl2500-user-guide-83bdca9/286.png)