D-Link DFL-2500 User Guide - Page 304
Default Gateway
![]() |
View all D-Link DFL-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
27.3. Scenarios: Enabling Transparent Mode 285 All traffic passing through the firewall will have to pass through the IP rule set. To allow HTTP traffic, a new IP rule has to be configured. (Refer to 14.3 Scenario.) WebUI : 1. Interfaces Interfaces → Ethernet → Edit (WAN): Enter the following: IP Address: 10.0.0.2 Network: 10.0.0.0/24 Default Gateway: 10.0.0.1 Transparent Mode: Enable Then click OK Interfaces → Ethernet → Edit (LAN): Enter the following: IP Address: 10.0.0.2 Network: 10.0.0.0/24 Transparent Mode: Enable Then click OK 2. Rules Rules → IP Rules → Add → IP Rule: Enter the following: Name: HTTPAllow Action: Allow Service: http Source Interface: LAN Destination Interface: any Source Network: 10.0.0.0/24 Destination Network: 0.0.0.0/0 (all-nets) Then click OK D-Link Firewalls User's Guide
![](/manual_guide/products/dlink-dfl2500-user-guide-83bdca9/304.png)