D-Link DGS-3630-28SC Quick installation Guide - Page 104

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description DHCPv6 Option 37. • Interface ID - Specifies to configure the Expert UDF format type string for DHCPv6 Option 18. Format Type Expert UDF Enter the format type expert UDF string that will be used on the specified port(s) here. Click the Apply button to accept the changes made. DHCPv6 Relay Port Settings This window is used to display and configure the DHCPv6 relay port settings. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Port Settings, as shown below: Figure 4-64 DHCPv6 Relay Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port State Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select to enable or disable the DHCPv6 relay port feature on the specified port(s) here. Click the Apply button to accept the changes made. DHCPv6 Local Relay VLAN This window is used to display and configure the DHCPv6 local relay VLAN settings. When DHCPv6 local relay is enabled, it will add Option 37 and Option 18 to the request packets from the client. If the check state of Option 37 is enabled, it will check the request packet from the client and drop the packet if it contains the Option 37 DHCPv6 relay function. If disabled, the local relay function will always add Option 37 to request packets, whether the state of Option 37 is enabled or disabled. The DHCPv6 local relay function will directly forward the packet from the server to the client. 92