D-Link DGS-3630-28SC Quick installation Guide - Page 388

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor, as shown below: Figure 6-187 Neighbor Window The fields that can be configured in Neighbor Settings are described below: Parameter IP Address VRF Name Remote AS Number Action Description Select and enter the IPv4 or IPv6 address of the neighboring router here. Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Please Select button to select a pre-configured VRF instance that will be used here. Enter the remote As number here. The range is from 1 to 4294967295. Select the action that will be taken here. Options to choose from are Add and Delete. Click the Apply button to accept the changes made. The fields that can be configured in Neighbor Table are described below: Parameter Address Family Description Select the address family that will be used here. Options to choose from are: • IPv4 Unicast - Specifies to display the BGP neighbor table related to the IPv4 unicast address family. • IPv4 Multicast - Specifies to display the BGP neighbor table related to the IPv4 multicast address family. • IPv6 Unicast - Specifies to display the BGP neighbor table related to the IPv6 unicast address family. • VPNv4 All - Specifies to display the BGP neighbor table related to the whole VPNv4 address family. • VPNv4 RD - Specifies to display the BGP neighbor table related to the Route Distinguisher (RD) in the VPNv4 address family. Enter the RD in the space provided. • VPNv4 VRF - Specifies to display the BGP neighbor table related to the VRF instance in the VPNv4 address family. Enter the name of the VRF instance here. This name can be up to 12 characters long. Alternatively, click the Please Select button to select a pre-configured VRF instance that will be used here. • L2VPN VPLS - Specifies to display the BGP neighbor table related to the 376