D-Link DGS-3630-28SC Quick installation Guide - Page 605

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Mask Description Enter the FEC subnet mask that will be associated with the ILM here. Click the Apply button to accept the changes made. Click the Delete by In Label button to delete the specified entry based on the In Label entered. Click the Delete All button to delete all the entries. The fields that can be configured for Find FTN are described below: Parameter IP Address Mask Description Enter the FEC IPv4 address of the FTN here. Enter the FEC subnet mask of the FTN here. Click the Find button to locate a specific entry based on the information entered. MPLS LDP Neighbor Password Settings This window is used to display and configure the MPLS LDP neighbor password settings. If the MD5 authentication is enabled, the LSR only establishes sessions with the peer when they exchange the same password. The password setting will be applied to negotiation with link neighbors or targeted neighbors. To view the following window, click MPLS > MPLS LDP Neighbor Password Settings, as shown below: Figure 11-4 MPLS LDP Neighbor Password Settings Window The fields that can be configured are described below: Parameter Neighbor IP Password Description Enter the neighbor IPv4 address here. This address will also be the neighbor's (peer) LSR ID. Enter the LDP peer password here. Select the Default option to use the default password (which is empty). Click the Apply button to accept the changes made. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MPLS LDP Neighbor Targeted Settings This window is used to display and configure the MPLS LDP neighbor targeted settings. LDP sends the targeted hello message at the configured interval to discover the neighbor. For a discovered neighbor, LDP maintains a hold-timer. The neighbor will time out if the timer has expired without the receipt of a hello message from the neighbor. 593