D-Link DGS-3630-28SC Quick installation Guide - Page 191
ERPS Version Settings, ERPS Version, G.8032v1, Apply, Ethernet Ring G.8032, Ring Name, Edit Ring
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in ERPS Version Settings are described below: Parameter ERPS Version Description Select the ERPS version here. Options to choose from are G.8032v1 and G.8032v2. G.8032v2 provides the following functions: • Supports multi-instance in a physical ring. • Supports operation commands: manual, force, and clear. • Supports to configure the sending of the R-APS PDU destination address with the RING-ID of the physical ring. Before specifying G.8032v1 for a G.8032v2-running device, delete all ERPS configurations that G.8032v1 does not support. Otherwise, the version cannot be changed. Changing the ERPS version will lead to the restart of the running protocol. The following configurations will check when to change from G.8032v2 to G.8032v1: • Manual switch or force switch command will be cleared. • The major ring instance and sub-ring instance of the interconnection node must have different R-APS VLAN IDs. • In a physical ring, only one instance is supported. If Ethernet ring nodes running ITU-T G.8032v1 and ITU-T G.8032v2 co-exist on an Ethernet ring, the following configurations should be made on the G.8032v2 device: • All physical ring IDs must have the default value of 1. • The major ring instance and sub-ring instance of the interconnection node must have different R-APS VLAN IDs. • Manual switch or force switch command must not exist. • The physical ring must have only one instance. Click the Apply button to accept the changes made. The fields that can be configured in Ethernet Ring G.8032 are described below: Parameter Ring Name Description Enter the Ethernet Ring Protection (ERP) instance name here. This name can be up to 32 characters long. Click the Apply button to create an ITU-T G.8032 ERP physical ring. Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring. Click the Show Detail button to view the ITU-T G.8032 ERP physical ring status information. Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 179