D-Link DGS-3630-28SC Quick installation Guide - Page 223
Replace Source IP Settings, Replace Priority Settings
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Add button to add a new entry based on the information entered. The fields that can be configured in Member Port Settings are described below: Parameter VID Action Role Description Enter the multicast VLAN ID that will be used here. The range is 2 to 4094. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Select the role here. Options to choose from are Receiver and Source. • Receiver - Specifies to configure the port as a subscriber port that can only receive multicast data in the multicast VLAN. • Source - Specifies to configure the port as an uplink port that can send multicast data in the multicast VLAN. Type Select the type here. Options to choose from are Tagged and Untagged. • Tagged - Specifies that if a port is a tagged member, the packets sent from the port are tagged with the Multicast VLAN ID. • Untagged - Specifies that if the port is an untagged member, then the packets will be forwarded in the untagged form. Unit From Port - To Port Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Click the Apply button to accept the changes made. The fields that can be configured in Replace Priority Settings are described below: Parameter VID Action IP Type Description Enter the multicast VLAN ID that will be used here. The range is 2 to 4094. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Select the IP type here. Options to choose from are IPv4 and IPv6. • IPv4 - Specifies to the remap priority for IPv4 multicast packets forwarded on the multicast VLAN. • IPv6 - Specifies to the remap priority for IPv6 multicast packets forwarded on the multicast VLAN. Priority Select the priority value here. The range is from 0 to 7. Click the Apply button to accept the changes made. The fields that can be configured in Replace Source IP Settings are described below: Parameter VID Action Address Type Description Enter the multicast VLAN ID that will be used here. The range is 2 to 4094. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Select the address type here. Options to choose from are IPv4 and IPv6. • IPv4 - Specifies to enter the source IPv4 address for IGMP control packet reporting up to routers. • IPv6 - Specifies to enter the source IPv6 address for MLD control packet reporting up to routers. 211