D-Link DGS-3630-28SC Quick installation Guide - Page 494
Security > Port Security > Port Security Port Settings, Security Mode
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 494 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > Port Security > Port Security Port Settings, as shown below: Figure 9-2 Port Security Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port State Maximum Violation Action Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the port security feature on the port(s) specified. Enter the maximum number of secure MAC addresses that will be allowed on the port(s) specified. This value must be between 0 and 12288. By default, this value is 32. Select the violation action that will be taken here. Options to choose from are Protect, Restrict, and Shutdown. • Selecting Protect specifies to drop all packets from the insecure hosts at the port-security process level, but does not increment the security-violation count. • Selecting Restrict specifies to drop all packets from the insecure hosts at the port-security process level and increments the security-violation count and record the system log. • Selecting Shutdown specifies to shut down the port if there is a security violation and record the system log. Security Mode Select the security mode option here. Options to choose from are Permanent and Delete-on-Timeout. • Selecting Permanent specifies that under this mode, all learned MAC addresses will not be purged out unless the user manually deletes those entries. • Selecting Delete-on-Timeout specifies that under this mode, all learned MAC addresses will be purged out when an entry is aged out or when the user manually deletes these entries. Aging Time Aging Type Enter the aging time value used for auto-learned dynamic secured addresses on the specified port here. This value must be between 0 and 1440 minutes. Select the aging type here. Options to choose from are Absolute and Inactivity. • Selecting Absolute specifies that all the secure addresses on this port age out exactly after the time specified and is removed from the secure address list. This is the default type. • Selecting Inactivity specifies that the secure addresses on this port age out 482