D-Link DGS-3630-28SC Quick installation Guide - Page 93

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in DHCP Relay Information Option Format Global are described below: Parameter Unit From Port - To Port Format Type Value Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Specifies that the expert UDF format will be used. Select to use the Remote ID type or Circuit ID type here. Enter the vendor-defined string for Option 82 information in the remote/circuit ID sub-option here. This string can be up to 32 characters long. Click the Apply button to accept the changes made. DHCP Relay Information Profile Settings This window is used to display and configure the DHCP relay information profile settings. To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information Profile Settings, as shown below: Figure 4-56 DHCP Relay Information Profile Settings Window The fields that can be configured in DHCP Relay Information Option MAC Format are described below: Parameter Case Description Select the case that will be used here. Options to choose from are: • Lowercase - Specifies that when using the lowercase format, the Option 82 MAC address for the user-defined profile will be formatted as: aa-bb-cc-ddee-ff. • Uppercase - Specifies that when using the uppercase format, the Option 82 MAC address for the user-defined profile username will be formatted as: AABB-CC-DD-EE-FF. Delimiter Select the delimiter that will be used here. Options to choose from are: • Hyphen - Specifies that the format will be AA-BB-CC-DD-EE-FF. • Colon - Specifies that the format will be AA:BB:CC:DD:EE:FF. • Dot - Specifies that the format will be AA.BB.CC.DD.EE.FF. • None - Specifies that when not using any delimiter, the format will be 81