D-Link DGS-3630-28SC Quick installation Guide - Page 338
PIM for IPv6 BSR Candidate Settings
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter BSR Domain Border PIM Passive Mode Description longer for lower-speed links, or for routers in the center of the network that expect to have a larger number of entries). For SM-mode, the router will periodically send the join message based on this interval. The hold-time in a Join/Prune message is 3.5 times the join-pruneinterval. The receiving router will start a timer based on this hold-time, and prune the interface if no join message is received on this interface. Select the Default option to use the default value, which is 60 seconds. Select to enable or disable the BSR domain border feature here. When an interface is configured as a border, it will prevent bootstrap router (BSR) messages from being sent or received through it. Select to enable or disable the PIM passive mode for this interface here. This feature only takes effect when the interface is IPv6 PIM enabled. When the passive mode is enabled, the interface will neither send PIM messages out nor accept PIM messages from this interface. The router will act as it is the only PIM router on the network. Use this feature only when there is only one PIM router on the LAN. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. PIM for IPv6 BSR Candidate Settings This window is used to display and configure the IPv6 PIM BSR candidate settings. This feature only affects PIM-SM operation. This will cause the router to send bootstrap messages to all its PIM neighbors, with the address of the designated interface as the BSR address. A PIM-SM domain must contain a unique BSR (Bootstrap Router) which is responsible for collect and advertise the RP information. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for IPv6 BSR Candidate Settings, as shown below: Figure 6-123 PIM for IPv6 BSR Candidate Settings Window The fields that can be configured are described below: Parameter Interface Name Description Enter the VLAN interface name used here. 326