D-Link DHP-W306AV Product Manual - Page 21

Section 3 - Configuration Wireless Setup Enable Check this box to enable the wireless function. If you Wireless: would prefer not to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specific time range (schedule). Select a schedule from the drop-down menu or click Add New Schedule to create a new schedule. Wireless When you are browsing for available wireless Network networks, this is the name that will appear in the list Name: (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, changing the default network name is highly recommended. Enable Auto The Auto Channel Scan setting can be selected to allow Channel the DHP-W306AV to select the channel with the least Scan : amount of interference (during boot-up). Indicates the channel setting for the DHP-W306AV. Wireless The channel can be changed to fit the channel setting Channel: for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out. Wireless Select one of the following: Mode: 802.11n Only - Select if you are only using 802.11n wireless clients. Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Mixed 802.11n, 802.11g - Select if you are only using 802.11n, 11g wireless clients. D-Link DHP-W306AV User Manual 21