D-Link DHP-W306AV Product Manual - Page 24

LAN Setup - Static IP, LAN Connection, IP Address, Subnet Mask, Default Gateway, Device Name - connection drops

Get D-Link DHP-W306AV PDF manuals and user guides
UPC - 790069339226
View all D-Link DHP-W306AV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Section 3 - Configuration LAN Setup - Static IP Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses. LAN Connection Select Static IP from the drop-down menu. Type: IP Address: Enter the IP address of the access point. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to return to the configuration utility. Subnet Mask: Enter the Subnet Mask. Default Gateway: Enter the Gateway. This is usually the LAN or internal IP address of your router. Device Name: Enter the Device Name of the AP. It is recommended that you change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access it instead of IP address for configuration. If you are using the device name to connect, make sure that your PC and your DHP-W306AV are on the same network. Save Settings: Click Save Settings to save and activate the new changes. D-Link DHP-W306AV User Manual 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
24
D-Link DHP-W306AV User Manual
Section 3 - Configuration
Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses.
LAN Connection
Type:
IP Address:
Subnet Mask:
Default Gateway:
Device Name:
Save Settings:
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The
default IP address is 192.168.0.50. If you change
the IP address, once you click Apply, you will
need to enter the new IP address in your
browser to return to the configuration
utility.
Enter the Subnet Mask.
Enter the Gateway. This is usually the LAN or
internal IP address of your router.
Enter the Device Name of the AP. It is
recommended that you change the Device
Name if there is more than one D-Link device
within the subnet. You can enter the device
name of the AP into your web browser to access
it instead of IP address for configuration. If you
are using the device name to connect, make
sure that your PC and your DHP-W306AV are
on the same network.
Click
Save Settings
to save and activate the
new changes.
LAN Setup - Static IP