D-Link DHP-W306AV Product Manual - Page 49

D-Link DHP-W306AV User Manual, Configuration, Security Mode, WPA Mode, Cipher Type - d link default ip

Get D-Link DHP-W306AV PDF manuals and user guides
UPC - 790069339226
View all D-Link DHP-W306AV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Section 3 - Configuration It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Setup and then click Wireless Settings on the left side. 2. For Security Mode, select WPA-Enterprise. 3. For WPA Mode, you can select Auto (WPA or WPA2), WPA2 only or WPA Only. 4. For Cipher Type, select TKIP or AES. 5. Next to RADIUS Server, enter the IP Address of your RADIUS server. 6. For Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. Click Save Settings to save your settings. D-Link DHP-W306AV User Manual 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
49
D-Link DHP-W306AV User Manual
Section 3 - Configuration
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on
Setup
and then click
Wireless Settings
on the left side.
2. For
Security Mode
, select
WPA-Enterprise
.
3. For
WPA Mode,
you can select
Auto (WPA or WPA2)
,
WPA2 only
or
WPA Only
.
4. For
Cipher Type
, select
TKIP
or
AES
.
5. Next to
RADIUS Server
, enter the IP Address of your RADIUS server.
6. For
Port
, enter the port you are using with your RADIUS server. 1812
is the default port.
7. Next to
Shared Secret
, enter the security key.
8. Click
Save Settings
to save your settings.