D-Link DI-704GU User Manual

D-Link DI-704GU Manual

Get D-Link DI-704GU PDF manuals and user guides View all D-Link DI-704GU manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DI-704GU manual content summary:

  • D-Link DI-704GU | User Manual - Page 1
  • D-Link DI-704GU | User Manual - Page 2
    20 Printer Wizard 23 WAN 28 Dynamic IP Address 28 Static IP Address 30 PPPoE 32 PPTP 34 L2TP 36 Big Pond 38 D-Link DI-704GU User Manual LAN 40 DHCP 42 Advanced 44 Virtual Server 44 Applications 45 Port Forwarding 46 StreamEngine 47 Filters 49 Parental Control 52 Firewall 53 DMZ
  • D-Link DI-704GU | User Manual - Page 3
    Table of Contents Troubleshooting 73 Networking Basics 80 Check Your IP Address 80 Statically Assign an IP Address 81 Technical Specifications 82 Contacting Technical Support 83 Notices 84 D-Link DI-704GU User Manual 
  • D-Link DI-704GU | User Manual - Page 4
    Section 1 - Product Overview Package Contents • D-Link DI-704GU Gigabit QoS Router • CAT5 Ethernet Cable • Power Adapter Note: Using a power supply with a systems with an installed Ethernet adapter • Internet Explorer 6.x and above, or Netscape® Navigator 7.0 and above D-Link DI-704GU User Manual 
  • D-Link DI-704GU | User Manual - Page 5
    Overview Introduction The D-Link DI-704GU Gigabit QoS Router integrates highly useful features to make business more productive. The DI-704GU combines broadband Internet sharing, a USB print server, a QoS engine, and four Gigabit LAN ports to provide centralized printing services, improved VoIP
  • D-Link DI-704GU | User Manual - Page 6
    manage users on the network. • Supports special applications that require multiple connections. • Equipped with 4 Gigabit Ethernet ports, 1 WAN port, all Auto MDI/MDIX. • Also includes one USB 2.0 Printer sharing port with Windows Connect Now configuration compliance. D-Link DI-704GU User Manual 
  • D-Link DI-704GU | User Manual - Page 7
    blinks during data transmission. Local Network LEDs A solid light on each port indicates a connection to an Ethernet enabled device. These LEDs blink during data transmission. D-Link DI-704GU User Manual 
  • D-Link DI-704GU | User Manual - Page 8
    the connections for Ethernet cables to Ethernet-enabled computers. Power Receptor Reset Button Pressing this button restores the Router to its original factory default settings. D-Link DI-704GU User Manual 
  • D-Link DI-704GU | User Manual - Page 9
    and repeat the instructions. C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-704GU and an available DI-704GU.The DFE530TX or DGE-530T PCI Adapters (as examples) will be able to connect with the router without any additional configuration required. D-Link DI-704GU User Manual
  • D-Link DI-704GU | User Manual - Page 10
    Section 1 - Product Overview Network Overview The DI-704GU Gigabit QoS Router is designed to allow Ethernet capable computers and VoIP phones to share an Internet connection through a Cable or DSL modem. D-Link DI-704GU User Manual 10
  • D-Link DI-704GU | User Manual - Page 11
    new D-Link Gigabit QoS Router using the D-Link Setup Wizard. Open your Web browser and type "http://192.168.0.1" into the URL address box. Then press the Enter or Return key. Select "Admin" from the User Name drop down menu and leave the password field blank. Click Login D-Link DI-704GU User Manual
  • D-Link DI-704GU | User Manual - Page 12
    itself. If the browser displays a pop-up window requesting permission to download the Printer Wizard program, answer Yes or OK. Continue to page 21 for instructions on running the Printer Wizard. D-Link DI-704GU User Manual 12
  • D-Link DI-704GU | User Manual - Page 13
    Section 2 - Configuration Setup Wizard Click Next You have the option to establish a password for the User Name "Admin". Click Next Choose your time zone from the drop down list. Click Next D-Link DI-704GU User Manual 13
  • D-Link DI-704GU | User Manual - Page 14
    fo��r Cable Internet services),��t�h�i�s�s��c�r�e�e��n��w��il�l �a�p��p�e�a��r�: Click the "Clone MAC Address" button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address. Click Next D-Link DI-704GU User Manual (After you click
  • D-Link DI-704GU | User Manual - Page 15
    Enter the IP address that was originally provided to you by your ISP. You will need to complete all of the required fields. Click Next D-Link DI-704GU User Manual (After you click Next, please turn to page 20.) 15
  • D-Link DI-704GU | User Manual - Page 16
    IP connection, enter the IP Address, Subnet Mask, Gateway IP Address, Server IP, PPTP Account, and Password provided to you by your ISP. Click Next D-Link DI-704GU User Manual (After you click Next, please turn to page 20.) 16
  • D-Link DI-704GU | User Manual - Page 17
    IP connection, enter the IP Address, Subnet Mask, Gateway IP Address, Server IP, PPTP Account, and Password provided to you by your ISP. Click Next D-Link DI-704GU User Manual (After you click Next, please turn to page 20.) 17
  • D-Link DI-704GU | User Manual - Page 18
    , enter the L2TP IP Address, Subnet Mask, Gateway IP Address, L2TP Server IP, User Name, and Password provided to you by your ISP. Click Next D-Link DI-704GU User Manual (After you click Next, please turn to page 20.) 18
  • D-Link DI-704GU | User Manual - Page 19
    the internet through Telstra BigPond Cable Broadband in Australia. Click Next Enter the User Name, and Password provided to you by your ISP. Click Next D-Link DI-704GU User Manual (After you click Next, please turn to page 20.) 19
  • D-Link DI-704GU | User Manual - Page 20
    Section 2 - Configuration Once you have completed the settings for your particular configuration, it is necessary to reboot the DI-704GU. Click Restart D-Link DI-704GU User Manual 20
  • D-Link DI-704GU | User Manual - Page 21
    Section 2 - Configuration Printer Wizard Before selecting to run the Printer Wizard, make sure your printer is connected to the USB port on the router. Click Next The wizard will identify the make and model of your printer, as well as its status. Click Next D-Link DI-704GU User Manual 21
  • D-Link DI-704GU | User Manual - Page 22
    Section 2 - Configuration Click Next to run the Printer Setup application. Click Next This application can only run when accessed from the router. Do not click Save. Click Run Click Run D-Link DI-704GU User Manual 22
  • D-Link DI-704GU | User Manual - Page 23
    OK. Once the wizard has completed installing your printer, you will be prompted to print a test page to verify its functionality. Click OK Click Finish D-Link DI-704GU User Manual 23
  • D-Link DI-704GU | User Manual - Page 24
    observe whether the router can obtain an IP address. In this mode, the router accepts unicast responses from the DHCP server instead of broadcast responses. D-Link DI-704GU User Manual 24
  • D-Link DI-704GU | User Manual - Page 25
    MAC address of the network adapter in the computer or router used to initially connect to their service. The ISP will then only grant Internet access to requests from a computer or router with this some connections. In either case, network performance can suffer. D-Link DI-704GU User Manual 25
  • D-Link DI-704GU | User Manual - Page 26
    the MAC address of the network adapter in the computer or router used to initially connect to their service. The ISP will then only grant Internet access to requests from a computer or router with this particular set to the MAC address of the WAN interface in the device. D-Link DI-704GU User Manual 26
  • D-Link DI-704GU | User Manual - Page 27
    zero causes immediate disconnection when the cable is pulled or when a glitch occurs. Having to increase Link Drop Delay because you are experiencing WAN disconnections for long periods would suggest a fault with the In either case, network performance can suffer. D-Link DI-704GU User Manual 27
  • D-Link DI-704GU | User Manual - Page 28
    you and the ISP. Password: This value is provided as part of the agreement between you and the ISP. Verify Password: Re-enter the password. Service Name: Service Name is optional, but may be required by some ISPs. If your ISP provides a Service Name, enter it here. D-Link DI-704GU User Manual 28
  • D-Link DI-704GU | User Manual - Page 29
    address of the network adapter in the computer or router used to initially connect to their service. The ISP will then only grant Internet access to requests from a computer or router set the connection select: mode. Choose Always on, Manual, or connect On demand. D-Link DI-704GU User Manual 29
  • D-Link DI-704GU | User Manual - Page 30
    Europe. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet. The ISP provides the values for PPTP IP Address, This value is provided by agreement between you and the ISP. D-Link DI-704GU User Manual 30
  • D-Link DI-704GU | User Manual - Page 31
    to 0.0.0.0. Maximum Idle The Maximum Idle Time value is used for the "On demand" and "Manual" connect modes. It specifies how many minutes Time: the WAN connection can be idle before the the connection select: mode. Choose Always on, Manual, or connect On demand. D-Link DI-704GU User Manual 31
  • D-Link DI-704GU | User Manual - Page 32
    ISP. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet. The ISP provides the values for L2TP IP Address, L2TP value is provided by agreement between you and the ISP. D-Link DI-704GU User Manual 32
  • D-Link DI-704GU | User Manual - Page 33
    to 0.0.0.0. Maximum Idle The Maximum Idle Time value is used for the "On demand" and "Manual" connect modes. It specifies how many minutes Time: the WAN connection can be idle before the the connection select: mode. Choose Always on, Manual, or connect On demand. D-Link DI-704GU User Manual 33
  • D-Link DI-704GU | User Manual - Page 34
    in the computer or router used to initially connect to their service. The ISP will then only grant Internet access to requests from a computer or router with this particular MAC address.Your new router has a different MAC address than the computer or router that D-Link DI-704GU User Manual 34
  • D-Link DI-704GU | User Manual - Page 35
    immediate disconnection when the cable is pulled or when a glitch occurs. Having to increase Link Drop Delay because you are experiencing WAN disconnections for long periods would suggest a fault with the cable or with the modem (if any) to which it is connected. D-Link DI-704GU User Manual 35
  • D-Link DI-704GU | User Manual - Page 36
    . V1. Use if none of the routers supports version 2. V2 Broadcast. Use if some routers are capable of version 2, but some are only capable of version 1. V2 Multicast. Use if the DI-704GU is the only router on the LAN or if all routers on the LAN support version 2. D-Link DI-704GU User Manual 36
  • D-Link DI-704GU | User Manual - Page 37
    For security, disable this option unless required by the ISP. from WAN: RIP Password: RIP Version 2 supports the use of a password to limit access to routers through the RIP protocol. If the ISP or another if you implement a LAN-side DNS server as a virtual server. D-Link DI-704GU User Manual 37
  • D-Link DI-704GU | User Manual - Page 38
    of this range are not managed by the DHCP Server; these could, therefore, be used for manually configured devices or devices that cannot use DHCP to obtain network address details automatically. Lease Time: no longer needed then another tenant may use the address. D-Link DI-704GU User Manual 38
  • D-Link DI-704GU | User Manual - Page 39
    will cause the router to always broadcast its responses to all clients, thereby working around the problem, but at the cost of increased broadcast traffic on the LAN. DHCP Reservations: In this section see what LAN devices are currently leasing IP addresses. List: D-Link DI-704GU User Manual 39
  • D-Link DI-704GU | User Manual - Page 40
    , go to the Advanced -> Firewall page and create a new firewall rule. Schedule: Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the Advanced -> Schedules screen and create a new schedule. D-Link DI-704GU User Manual 40
  • D-Link DI-704GU | User Manual - Page 41
    Type: Select the protocol used by the Internet traffic coming back into the router through the opened port range. Options are TCP, UDP, or Both. D-Link DI-704GU User Manual 41
  • D-Link DI-704GU | User Manual - Page 42
    whether changes have been saved.� IP Address: Enter the local network IP address of the system hosting the service, for example 192.168.0.50. TCP Ports to Enter the TCP ports to open (for example Open: go to the Advanced -> Schedules screen and create a new schedule. D-Link DI-704GU User Manual 42
  • D-Link DI-704GU | User Manual - Page 43
    speed with a service such as http://www.dslreports.com/. Note however that sites such as DSL Reports, because they do not consider as many network protocol overheads, will generally note speeds slightly lower than the Measured Uplink Speed or the ISP rated speed. D-Link DI-704GU User Manual 43
  • D-Link DI-704GU | User Manual - Page 44
    better results. Detected xDSL or When Connection Type is set to Auto-detect, the automatically detected connection type is displayed here. Other Frame Relay Network : D-Link DI-704GU User Manual 44
  • D-Link DI-704GU | User Manual - Page 45
    deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "IP Filters" section is activated for editing. D-Link DI-704GU User Manual 45
  • D-Link DI-704GU | User Manual - Page 46
    if you want all computers to computers with have network access except those computers MAC address in the list. listed below to access the network: D-Link DI-704GU User Manual 46
  • D-Link DI-704GU | User Manual - Page 47
    saved.� MAC Address: Enter the MAC address of the desired computer. You can type the MAC address manually in this box, or retrieve a MAC address automatically by using the DHCP Client control below. DHCP , and the "Add MAC Address" section is activated for editing. D-Link DI-704GU User Manual 47
  • D-Link DI-704GU | User Manual - Page 48
    control policies, and the Policy Wizard -- a sequence of steps that guide you through the creation and modification of policies. Add Policy: Click ; for example, enter dlink.com and access will be permitted to both www.dlink.com and support.dlink.com. Note: Many web Link DI-704GU User Manual 48
  • D-Link DI-704GU | User Manual - Page 49
    deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Firewall Rules" section is activated for editing. D-Link DI-704GU User Manual 49
  • D-Link DI-704GU | User Manual - Page 50
    , then you may want to make a DHCP reservation on the Home -> DHCP page, so that the IP address of the DMZ machine does not change. D-Link DI-704GU User Manual 50
  • D-Link DI-704GU | User Manual - Page 51
    box and the minutes in the second box. The end time is used for most other rules, but is not normally used for e-mail events. D-Link DI-704GU User Manual 51
  • D-Link DI-704GU | User Manual - Page 52
    see the firewall rule you need in Firewall Rule: the list of firewall rules, go to the Advanced -> Firewall page and create a new firewall rule. D-Link DI-704GU User Manual 52
  • D-Link DI-704GU | User Manual - Page 53
    not specify an interval smaller than necessary to maintain accurate time. Manual: If you do not have the NTP Server option in effect, you can either manually set the time for your router here, or you can click the router, or you must enable the NTP Server option. D-Link DI-704GU User Manual 53
  • D-Link DI-704GU | User Manual - Page 54
    for the start you select Month="Oct" and Week="3rd". This is the same as saying: "Daylight saving starts on the third Sunday of October." D-Link DI-704GU User Manual 54
  • D-Link DI-704GU | User Manual - Page 55
    lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button as described above. D-Link DI-704GU User Manual 55
  • D-Link DI-704GU | User Manual - Page 56
    enter that key in all three fields. Password or Key: Enter the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter that key in all three fields. -> Virtual Server configuration page to set up a virtual server. D-Link DI-704GU User Manual 56
  • D-Link DI-704GU | User Manual - Page 57
    way" of the communication). Enabling a VPN ALG also allows incoming VPN connections (refer to Virtual Services) to a LAN side VPN server. Note: L2TP VPN connections typically use IPSec to secure the Advanced -> Firewall page and create a new firewall rule. D-Link DI-704GU User Manual 57
  • D-Link DI-704GU | User Manual - Page 58
    to use UPnP functionality, you can enable it here. WAN select to 10/100Mbps: Normally, this is set to "10/100Mbps Auto." If you have trouble connecting to the WAN, try the other settings. D-Link DI-704GU User Manual 58
  • D-Link DI-704GU | User Manual - Page 59
    to support the LPD/LPR LPD/LPR Printing: protocol. Printers are identified by a symbolic queue name. This option is disabled by default; enable it if required by the devices on the LAN. This method of printing is generally preferred for Unix or Macintosh (starting with Mac OS 8.1). D-Link DI-704GU
  • D-Link DI-704GU | User Manual - Page 60
    configured in DHCP Server. Computers that have an address outside of this range will not show. If the DHCP Client (i.e., a computer configured to "Automatically obtain D-Link DI-704GU User Manual 60
  • D-Link DI-704GU | User Manual - Page 61
    the router on the interface specified: LAN or WAN. A value of 0.0.0.0 in both the destination IP and netmask means that this is the default route. D-Link DI-704GU User Manual 61
  • D-Link DI-704GU | User Manual - Page 62
    e-mail information in the Log e-mail settings fields (described above), clicking the Send Mail Now button sends the router log to the configured e-mail address. D-Link DI-704GU User Manual 62
  • D-Link DI-704GU | User Manual - Page 63
    button restarts the packet tallies from zero. Receive: The number of packets received by the router. Transmit: The number of packets sent from the router. D-Link DI-704GU User Manual 63
  • D-Link DI-704GU | User Manual - Page 64
    LAN to WAN. Ingress: Initiated from WAN to LAN. Time Out: The number of seconds of idle time until the router considers the session terminated. D-Link DI-704GU User Manual 64
  • D-Link DI-704GU | User Manual - Page 65
    the "IP Address" and "Queue Name" values that you need to enter when you configure your computer to use the printer in LPR/LPD mode. D-Link DI-704GU User Manual 65
  • D-Link DI-704GU | User Manual - Page 66
    Section 2 - Configuration Help D-Link DI-704GU User Manual 66
  • D-Link DI-704GU | User Manual - Page 67
    will need to be returned for service. 3. Resetting the DI-704GU to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to reset the DI-704GU to the factory default settings. • To hard-reset the DI-704GU to Factory Default Settings, please do
  • D-Link DI-704GU | User Manual - Page 68
    is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DI-704GU User Manual 68
  • D-Link DI-704GU | User Manual - Page 69
    Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. your ISP. Step 5 Click OK twice to save your settings. D-Link DI-704GU User Manual 69
  • D-Link DI-704GU | User Manual - Page 70
    ) • MAC Filtering • URL Filtering • Scheduling • NAT (Network Address Translation) with VPN Passthrough Operating Temperature • 0�oC to 55oC (3�2�oF to 131oF) Humidity • 95% maximum (non-condensing) D-Link DI-704GU User Manual 70
  • D-Link DI-704GU | User Manual - Page 71
    & Ireland: D-Link UK & Ireland Technical Support over the Telephone: +44 (0)845 612 0003 (United Kingdom) +353 1890 886 899 (Ireland) Monday to Friday 8:00 am to 10:00 pm (see website for details) D-Link Technical Support over the Internet: http://www.dlink.co.uk D-Link DI-704GU User Manual 71
  • D-Link DI-704GU | User Manual - Page 72
    can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that . • Consult the dealer or an experienced radio/TV technician for help. D-Link DI-704GU User Manual 72
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72