D-Link DI-704GU User Manual - Page 57
Miscellaneous
View all D-Link DI-704GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Section 2 - Configuration Miscellaneous Restart Device: Clicking the Reboot button will restart the router. This is useful for restarting when you are not near the router. ALG, VPN Pass- When the IPSec VPN ALG is enabled, LAN Through: computers can establish VPN connections either with the same or with different VPN servers. When the VPN ALG is disabled, the ALG does not function; however, the router allows VPN operation in a restricted way. When the VPN ALG is disabled, LAN computers are typically able to establish VPN tunnels to different VPN Internet servers but not to the same server. The advantage of disabling the ALG is to increase VPN performance (the ALG does not "get in the way" of the communication). Enabling a VPN ALG also allows incoming VPN connections (refer to Virtual Services) to a LAN side VPN server. Note: L2TP VPN connections typically use IPSec to secure the connection. To achieve multiple VPN pass-through in this case, the IPSec ALG must be enabled. Discard Ping from WAN Side: If you enable this option, you are causing the router not to respond to ping commands to the public WAN IP address of the router. Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is valid. Firewall Rule: Select a firewall rule that controls access as needed for ping commands. If you do not see the firewall rule you need in the list of firewall rules, go to the Advanced -> Firewall page and create a new firewall rule. D-Link DI-704GU User Manual 57