D-Link DI-704GU User Manual - Page 61
Multicast Group, Address, Routing Table
![]() |
View all D-Link DI-704GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Section 2 - Configuration an address") supplies a Host Name, that will also be shown. Any computer or device that has a static IP address that lies within the detection "range" may show; however, its host name will not. Multicast Group If IGMP is enabled, this area of the screen show all multicast groups of which any LAN devices are members. Address: Routing Table: The routing section displays all of the routing details configured for your router. A value of 0.0.0.0 for a gateway means there is no next hop, and the IP address is directly connected to the router on the interface specified: LAN or WAN. A value of 0.0.0.0 in both the destination IP and netmask means that this is the default route. D-Link DI-704GU User Manual 61
![](/manual_guide/products/dlink-di704gu-user-manual-2792bce/61.png)
´1
D-Link DI-704GU User Manual
Section ± - Configuration
an address”) supplies a Host Name, that will also be shown. Any computer or device that has a static IP address that
lies within the detection “range” may show; however, its host name will not.
If IGMP is enabled, this area of the screen show all multicast groups of which any LAN devices are members.
The routing section displays all of the routing details configured for your router.
A value of 0.0.0.0 for a gateway means there is no next hop, and the IP address is directly connected to the router on
the interface specified: LAN or WAN. A value of 0.0.0.0 in both the destination IP and netmask means that this is the
default route.
Multicast Group
Address:
Routing Table: