D-Link DIR-2680-US User Manual - Page 36
Point-to-Point-Tunneling Protocol if your Internet Service, PPTP Server IP, Address, Username
View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 4 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server IP Enter the PPTP server IP address provided by your ISP. Address: Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet connection is Time: maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 32