D-Link DIR-2680-US User Manual - Page 49
PPPoE, Select, if your ISP provides and requires you to enter a PPPoE username
![]() |
View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Section 4 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session. Address Mode: Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Select Create a new session as the PPPoE Session: Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Address Mode: Select either Dynamic IP or Static IP. Service Name: Enter the ISP service name (optional). Reconnect Mode: Select either Always On or Manual. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. If you selected Static IP as the Address Mode and Create a new session as the PPPoE Session: IP Address: Enter the IP address provided by your ISP Service Name: Enter the ISP service name (optional). D-Link DIR-2680 User Manual 45
![](/manual_guide/products/dlink-dir2680us-user-manual-fb013b4/49.png)