D-Link DIR-2680-US User Manual - Page 46
Auto Configuration SLAAC/DHCPv6, Auto Configuration
View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration if your ISP assigns your IPv6 address when your router requests one from the ISP's server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected: Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-2680 User Manual 42