D-Link DIR-2680-US User Manual - Page 62
Network
![]() |
View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Section 4 - Configuration Network This section will allow you to change the local network settings of the router and to configure the DHCP settings. In the Settings menu at the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network Settings LAN IP Address: Enter the IP address of the router.The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Management The default address to access the router's configuration is Link: http://dlinkrouter.local/. Here, you can replace dlinkrouter with a name of your choice. Local Domain Enter the domain name (optional). Name: Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server. D-Link DIR-2680 User Manual 58
![](/manual_guide/products/dlink-dir2680us-user-manual-fb013b4/62.png)