D-Link DIR-2680-US User Manual - Page 73
Add Route, If you wish to remove a rule, click on its trash can icon in the Delete column. If
View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Section 4 - Configuration IPv6 To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Route button. Click Save when you are done. If you edit or create a rule, the following options will appear: Name: Enter a name for the rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the packets that will take this route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-2680 User Manual 69