D-Link DIR-2680-US User Manual - Page 50
Reconnect Mode, DNS Type, Primary DNS, Server, Secondary DNS, Enable DHCP-PD, LAN IPv6 Link
View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Section 4 - Configuration PPPoE (continued) Reconnect Mode Select either Always-on or Manual. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected: Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled these additional parameters are available for configuration: LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router. D-Link DIR-2680 User Manual 46