D-Link DNS-340L User Manual - Page 16
Rear Panel
View all D-Link DNS-340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Section 1 - Product Overview Rear Panel Cooling Fan/Outlet Power Receptor USB Ports Gigabit Ethernet Port Reset Button COMPONENT Power Receptor Cooling Fan/Outlet USB Port Gigabit Ethernet Ports Reset Button DESCRIPTION Connect the supplied power cord to the receptor. The cooling fan cools the hard drives and features speed control. When the unit is first powered on, the fans rotate at a low speed, when the temperature inside the unit rises above 49 °C it will start to rotate at a higher speed. Do not cover or obstruct this outlet. Two USB 2.0 (type A) connectors. The USB Host port is for Printers, USB storage, or USB UPS monitoring. Use the Gigabit Ethernet ports to connect the ShareCenter to your local network. The port is equipped with 2 LEDs. The LED on the left will illuminate solid green for a good connection and will blink during data transmission. If this LED is off, check the connection/cable to the device you are connecting to. The LED on the right will light solid for a Gigabit connection and will remain off when connected to a 10/100 Mbps device. Press and hold this button for more than 5 seconds to reset it to its factory defaults. D-Link ShareCenter DNS-340L User Manual 14