D-Link DNS-340L User Manual - Page 43
RAID 0, RAID Configuration, elect RAID Type
![]() |
View all D-Link DNS-340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Section 3 - Installation RAID 0 Under RAID Configuration, Select RAID Type, choose RAID 0. Read the RAID 0 configuration requirements. Click Next to continue. With RAID 0, the two drives are 'striped' into one volume, making it appear that you have one drive. Data is saved evenly across the two drives. Map Drive to Network indicates that the NAS has separated the drive into 2 volumes; if the two drives are different sizes, the excess drive space will be formatted as a separate JBOD volume. To have only one volume, you should use two hard drives of the same size. Use the drop-down menus to select a drive letter to map each of the volumes to. For further information, please refer to "Mapping a Drive" on page 59. Click Next to continue. D-Link ShareCenter DNS-340L User Manual 41
![](/manual_guide/products/dlink-dns340l-user-manual-d212016/43.png)