D-Link DSN-1100-10 Hardware Reference Guide for DSN-1100-10 Valid for fir - Page 20

3.1 Site Considerations The site where you install the DSN-1100 storage system can affect its performance. Therefore, choose a site that conforms to the requirements in the following sections. 3.1.1 General Considerations Observe the following considerations when selecting a location to install the DSN-1100 storage system.  The location should be fairly cool and dry for the acceptable temperature and humidity ranges.  The location should be free of strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight.  The location must provide sufficient airflow to the front and back of the DSN-1100 storage system for correct cooling. Ventilation must be sufficient to exhaust heat from the rear of the equipment.  The location should offer a power outlet within six feet (1.82 meters) of the DSN-1100 storage system.  The location should allow for at least six inches (152.3 mm) of space around the DSN1100 storage system for ventilation.  Do not place the DSN-1100 storage system next to, on top off, or below any device that generates a significant amount of heat or will block the fee flow of air through the DSN1100 ventilation slots. 3.1.2 Desktop, Floor or Shelf Installation The DSN-1100 storage system can be placed on a desktop, floor or shelf. Observe the following considerations for installations.  Select a sturdy, level surface that can support the DSN-1100 storage system. A fully populated unit weighs approximately 8.8 lbs. (4.0 kg.).  Allow enough ventilation space between the DSN-1100 storage system and any other objects in the vicinity.  Be sure not to block the air vents on the front and back of the DSN-1100 storage system enclosure. Install the cables and power cord according to the procedures in the following sections. 20 Chapter 3 Installing the DSN-1100 Storage System