D-Link DSS 24 User Guide - Page 13

DSS-24 10/100 Auto Negotiation Switch User's Guide Installation Options There are two options for installing the DSS-24: desktop/shelf installation or rack installation. The procedures for each are explained in the following sections. The following tools and materials may be necessary to install the DSS-24: • Screwdriver to install the brackets as needed. • Wire cutters to cut cable as needed for network connections. • Crimpers to crimp cable as needed. • RJ-45 connectors as needed. Desktop/Shelf Installation The dimensions of the DSS-24 are: 441 mm (17.44 inches) x 235 mm (9.25 inches) 63 mm (2.44 inches). The measurements include the 8 mm (.31 inch) rubber feet. Follow these guidelines for desktop/shelf installation or rack installation: • The surface must support 3 kg (6.6 lbs). • The power source must be within 1.82 m (6 feet). • Power cord and cables should never be stretched. • Leave at least 5 cm (two inches) around the DSS-24 for ventilation. Follow these steps to install the DSS-24 on a desktop or shelf: 1. Place the four rubber feet at the corners of the DSS-24, see Figure 4. 2. Place the DSS-24 on the desktop/shelf, see Figure 5. Installing the DSS-16 and DSS-24 7