D-Link DSS 24 User Guide - Page 15
Rack Installation - 10
 |
UPC - 790069237812
View all D-Link DSS 24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
DSS-24 10/100 Auto Negotiation Switch User's Guide Rack Installation The DSS-24 can be mounted in an EIA standard size 19 inch rack. The dimensions are: 441 mm (17.44 inches) x 235 mm (10.03 inches) x 55 mm (2.16 inches), 1.25 U. DSS-24 can be placed in a wiring closet along with other equipment. Follow these steps to install the DSS-24 on a rack: 1. Attach a mounting bracket to each side of the DSS-24 with the screws provided, see Figure 6. 2. Slide the DSS-24 into the rack and use the screws provided to secure the DSS-24 to the rack, see Figure 7. 3. Connect the power cord and verify that the DSS-24 is receiving adequate power. Figure 6: Attach Mounting Brackets Installing the DSS-16 and DSS-24 9
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
 |
 |
DSS-24 10/100 Auto Negotiation Switch User’s Guide
Installing the DSS-16 and DSS-24
9
Rack Installation
The DSS-24 can be mounted in an EIA standard size 19 inch rack. The
dimensions are: 441 mm (17.44 inches) x 235 mm (10.03 inches) x 55 mm (2.16
inches), 1.25 U. DSS-24 can be placed in a wiring closet along with other
equipment.
Follow these steps to install the DSS-24 on a rack:
1.
Attach a mounting bracket to each side of the DSS-24 with the
screws provided, see Figure 6.
2.
Slide the DSS-24 into the rack and use the screws provided to
secure the DSS-24 to the rack, see Figure 7.
3.
Connect the power cord and verify that the DSS-24 is receiving
adequate power.
Figure 6: Attach Mounting Brackets