D-Link DSS 24 User Guide - Page 17

DSS-24 10/100 Auto Negotiation Switch User's Guide Power On The power supply will adjust to the local power source automatically. The DSS24 may be plugged in without having any or with all LAN segment cables connected. The power plug is located at the rear of the DSS-24. Plug the cable into the wall socket and plug the other end into the DSS-24. There is no on/off switch. The DSS-24 powers on when you plug the power cord into the three pronged power connector. The Power LED will light when the DSS-24 is powered on. All ports will automatically negotiate the proper speed and duplex mode. Reboot the DSS-24 if there is a problem. Contact D-Link Systems, Inc. for technical support. After a power failure, it may be necessary to reconfigure any ports that were manually set. All other ports should automatically negotiate the proper speed and duplex mode. The DSS-24 can be used with power sources in the range 100 to 240 VAC., 50 to 60 Hz. Installing the DSS-16 and DSS-24 11