D-Link DWL-3500AP Administration Guide - Page 110
Obtaining a TLS, EAP Certificate for a Client, Properties
UPC - 790069297090
View all D-Link DWL-3500AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
D-Link Unified Access Point Administrator's Guide Enable (click to check) "Validate server certificate" Select (check) the name of certificate on this client (downloaded from RADIUS server in a prerequisite procedure) 3 2. Configure the following settings on the Association tab on the Network Properties dialog. Network Authentication Open Data Encryption WEP Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redundancy checking (CRC) of each IEEE 802.11 frame. This is the same encryption algorithm as is used for Static WEP; therefore, the data encryption method configured on the client for this mode is WEP. This key is provided for Enable (click to check) this option. me automatically 3. Configure these settings on the Authentication tab. Enable IEEE 802.1X authentication for this network Enable (click to check) this option. EAP Type Choose Smart Card or other Certificate. 4. Click Properties to bring up the Smart Card or other Certificate Properties dialog and enable the "Validate server certificate" option. Validate Server Certificate Enable this option (click to check the box). Certificates In the certificate list shown, select the certificate for this client. Click OK on all dialogs to close and save your changes. 5. To complete the client configuration you must now obtain a certificate from the RADIUS server and install it on this client. For information on how to do this see "Obtaining a TLSEAP Certificate for a Client" on page 119. 110 © 2001-2008 D-Link Corporation. All Rights Reserved.