D-Link DWL-8200AP Product Manual - Page 68
DHCP client, Load Balance, User Limit, Console Protocol, Telnet Timeout, Public Community, Stream, - default ip
UPC - 790069276590
View all D-Link DWL-8200AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
DHCP client: There is a pull-down menu to select enabled or disabled. When enabled, the selected device(s) will function as a DHCP client(s). This allows them to receive IP configuration information from a DHCP server. When disabled, the access point(s) must have a static IP address assigned to them. Load Balance: This pull-down selection enables or disables load balancing. When you enable load balance you allow several access points to balance wireless network traffic and wireless clients among the access points with the same SSID. All the APs that share Load Balancing must have the same SSID. Assign each access point a different non-overlapping channel (e.g., 1, 6, 11). User Limit: Enter the number of the limit of load balancing users, from 0-64. Console Protocol: From the pull-down selection, choose either Telnet or SSH for Console protocol. Telnet Timeout: This pull-down selection defines the timeout period during a Telnet session with the selected device(s). SNMP: Select Enable to set the SNMP setting. SNMP is disabled by default. Public Community When SNMP is enabled, you can change the Public Community Stream: Name here. Private Community When SNMP is enabled, you can change the Private Community Stream: Name here. D-Link DWL-8200AP User Manual 68