D-Link DWL-8200AP Product Manual - Page 90
Enable Multi-SSID, Enable VLAN, VLAN ID, MSSID Index
UPC - 790069276590
View all D-Link DWL-8200AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Multi-SSID Enable Multi-SSID: When Multi-SSID is enabled, you can configure your SSIDs for either Both, 11a only, or 11g only networks. Enable VLAN: Check to use VLAN. Band: Select the wireless band (IEEE802.11a or IEEE802.11g). SSID: Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. VLAN ID: Enter a VLAN number (0 - 4094). MSSID Index: You can select up to 7 MSSIDs per band, the default MSSID is the primary, which puts the total to 8 MSSIDs per band. D-Link DWL-8200AP User Manual 90
90
D-Link DWL-8200AP User Manual
Multi-SSID
When Multi-SSID is enabled, you can configure your SSIDs for either
Both
,
11a
only, or
11g
only networks.
Check to use VLAN.
Select the wireless band (
IEEE802.11a
or
IEEE802.11g
).
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is
default
. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Enter a VLAN number (0 - 4094).
You can select up to 7 MSSIDs per band, the default MSSID is the
primary, which puts the total to 8 MSSIDs per band.
Enable Multi-SSID:
Enable VLAN:
Band:
SSID:
VLAN ID:
MSSID Index: