DIRECTV HR10-250 System Manual - Page 173
Serial., HDMI Output., USB Universal Serial Bus., Component Video Output., Composite A/V Output.
View all DIRECTV HR10-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Back Panel Reference functionality. The HD DVR periodically makes a brief phone call to update your service information. Do not connect the HD DVR to digital PBX systems. Doing so may permanently damage your HD DVR's modem and will void your warranty. 3. Serial. For future use. 4. IR. For future use. 5. HDMI Output. If your TV has an HDMI input jack, you can connect your HD DVR to your TV using the HDMI cable (supplied). If your TV has a DVI input jack, you can connect the HD DVR to your TV using the HDMI-to-DVI cable (supplied). Keep in mind that the HDMI Output jack can send audio and video, but a DVI Input jack accepts video only. So if you use the HDMI-to-DVI cable, you will need to make a separate audio connection. While a cable is connected to the HDMI Output jack, the Component Video Output is disabled. You can't view video from both the HDMI Output and the Component Video Output at the same time. 6. USB (Universal Serial Bus). (2 each) For future use. 7. Component Video Output. If your TV has Component Video Input jacks, you can connect the HD DVR to your TV using the Component Video cable (supplied). The Component Video Output is disabled if you connect a cable to the HD DVR's HDMI Output jack. You can't view video from both the HDMI Output and the Component Video Output at the same time. 8. Composite A/V Output. The red and white jacks (L and R) send a stereo audio signal, while the yellow (video) jack sends a standard-definition analog picture. Use the Composite A/V cable (supplied) to connect your HD DVR to your TV, A/V receiver, VCR, or DVD recorder with these jacks. The yellow video jack sends a picture only if the HD DVR's video output format is set to "480i." See page 29 for more about video A 163