Dell 1130N User Guide - Page 70
Troubleshooting - red light
View all Dell 1130N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes: Redistributing toner Tips for avoiding paper curls Tips for avoiding paper jams Clearing paper jams Solving other problems Redistributing toner When the toner cartridge is near the end of its life: White streaks or light printing occurs. The LED blinks red. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1. Open the front cover. 2. Pull the toner cartridge out. 3. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area. 4. Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine. Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks into place completely.