Dell 1420X User Guide - Page 41

Power Settings Select and press to activate power settings. The power settings menu consists of the following options: Advanced Settings Image Settings Display Settings Projector Settings Menu Settings Power Settings Information Quick Shutdown Power Saving Lamp Mode Lamp Hour Reset Dell 1420X Off 10 Min Normal Press Resolution: 1440x1050 QUICK SHUTDOWN-Select On to turn off the projector with a single press of the Power button. This function allows the projector to quick power off with an accelerated fan speed. Slightly higher acoustic noise is expected during quick power off. NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize. The projector will take a longer time to turn on if you try to power on immediately. Its cooling fan will run at full speed for about 30 seconds to stabilize the internal temperature. POWER SAVING-Select Off to disable Power Saving mode. By default, the projector is set to enter power saving mode after 10 minutes of no activity. A warning message appears on screen showing a 60-second countdown before switching to power saving mode. Press any key buttons during countdown period to stop power saving mode. You can also set a different delay period to enter power saving mode. The delay period is the time you want the projector to wait without an input signal. Power saving can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the delay period, the projector Using Your Projector 41