Dell 810 Owners Manual - Page 130
Installing the RAID Battery, If applicable, connect the battery cable to the connector on the storage
View all Dell 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Figure 3-21. Removing or Installing the RAID Battery 1 2 3 4 5 1 RAID battery cable 3 battery carrier 5 slots (2) 2 RAID battery 4 tabs (2) Installing the RAID Battery 1 Insert the RAID battery into the battery carrier. See Figure 3-21. 2 Align the tabs on the battery carrier with the battery carrier slots on the chassis. 3 Slide the battery carrier into the battery carrier slots until it locks into place. See Figure 3-21. 4 If applicable, connect the battery cable to the connector on the storage card. 5 Route the power/data cables along the chassis wall. See step 2 and step 3 of "Sliding the Front-Chassis Assembly" on page 98. 6 Close the system. See "Closing the System" on page 85. 130 Installing System Components
130
Installing System Components
Figure 3-21.
Removing or Installing the RAID Battery
Installing the RAID Battery
1
Insert the RAID battery into the battery carrier. See Figure 3-21.
2
Align the tabs on the battery carrier with the battery carrier slots on the
chassis.
3
Slide the battery carrier into the battery carrier slots until it locks into
place. See Figure 3-21.
4
If applicable, connect the battery cable to the connector on the storage
card.
5
Route the power/data cables along the chassis wall. See step 2 and step 3 of
"Sliding the Front-Chassis Assembly" on page 98.
6
Close the system. See "Closing the System" on page 85.
1
RAID battery cable
2
RAID battery
3
battery carrier
4
tabs (2)
5
slots (2)
1
3
2
4
5