Dell 810 Owners Manual - Page 66
Integrated Devices Screen, Boot Mode, Disabled, Enabled, All Ports On, Only Back Ports On, Ports Off - driver mac
View all Dell 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Option Hard-Disk Drive Sequence USB Flash Drive Emulation Type Boot Sequence Retry (Disabled default) Description Determines the order in which the BIOS attempts to boot from hard drives in the system during system startup. Determines the emulation type for a USB flash drive. If Boot Mode is set to UEFI, this field is disabled. If this field is enabled and the system has failed to boot, the system reattempts to boot after 30 seconds. Integrated Devices Screen Option Description Integrated SAS Controller Enables or disables the integrated SAS controller. (Enabled default) User Accessible USB Ports Enables or disables the user accessible USB ports. (All Ports On default) Options are All Ports On, Only Back Ports On, and All Ports Off. Internal USB Port (On default) Enables or disables the internal USB port. Internal SD Card Port (On default) Enables or disables the internal SD card port. Redundancy (Disabled default) Enables or disables the mirror mode. Embedded NIC1 and NIC2 (Enabled default) Enables or disables the operating system interface of the embedded NICs. The NICs can also be accessed through the system's management controller. Embedded Gb NICx (Enabled default) Enables or disables the integrated NIC. Options are Enabled and Enabled with PXE. PXE support allows the system to boot from the network. MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. Capability Detected (Disabled default) Displays the NIC features of the LOM NIC hardware key. NOTE: Some LOM features may require the installation of an additional driver. 66 Using the System Setup Program and UEFI Boot Manager