Dell Alienware 17 R4 Service Manual - Page 14
Replacing the base cover, Procedure - battery replacement
View all Dell Alienware 17 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Replacing the base cover NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Connect the battery cable to the system board. 2. Tighten the captive screw that secures the base cover to the computer base. 3. Replace the six screws (M2.5x13) that secure the base cover to the computer base. 14
Replacing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After working
inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1.
Connect the battery cable to the system board.
2.
Tighten the captive screw that secures the base cover to the computer base.
3.
Replace the six screws (M2.5x13) that secure the base cover to the computer base.
14