Dell Alienware 17 R4 Service Manual - Page 46
Replacing the power-adapter port, Procedure, Post-requisites
View all Dell Alienware 17 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Replacing the power-adapter port NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Align the power-adapter port in the slot on the palm-rest assembly. 2. Align the screw hole on the power-adapter port bracket with the screw hole on the palm-rest assembly. 3. Using the alignment post, place the power-adapter port bracket on the power-adapter port. 4. Replace the screw (M2x3) that secures the power-adapter port bracket to the palm-rest assembly. 5. Route the power-adapter port cable through the routing guides on the palm-rest assembly. Post-requisites 1. Replace the computer base. 2. Replace the rear-I/O cover. 3. Replace the memory modules. 4. Replace the solid-state drive. 5. Replace the wireless card. 6. Replace the base cover. 46